Christie 1506, Руководство по продукту и сборке

Страница: 15 / 56

Installation and User Manual 6820_00
15
Single cabinet assembly and installation
|
FIG. 6
STEP 4
The cabinet frame must be turned over before fixing.
Do not locate fixings where the access door is located. The bolt
head will prevent the door from seating correctly into the frame.
1. Roll the cabinet frame over so that the fixed channel frame is on the ground.
2. Place the cabinet frame in the final fixed position.
3. Mark out the fixing holes.
4. Move the cabinet frame to one side and drill the fixing holes with an 8 mm drill bit.
5. Move the cabinet frame back into the final fixing position and align the pre-drilled fixing
holes with the frame. Bolt down with suitable masonry anchors.
Important: It is critical to the operation of the appliance that the cabinet is stable and level.
Use packers to resolve minor levelling discrepancies or a bed of mortar for larger gaps.
3.4 Assembly and installation