Christie 1204, Инструкция по установке и эксплуатации

Страница: 7 / 46

Installation Manual 6837_00
7
1.5 Conditions of use
• This appliance must only be installed
and serviced by a licensed gasfitter
or suitably qualified person. They will
be directly responsible for installing
it according to the manufacturer’s
instructions, as well as AS/NZS5601,
local Gas Fitting Regulations, Municipal
Building Codes and all applicable
Statutory Regulations
• Where no specific instruction is provided,
refer to the following standards:
- AS/NZS 5601 Gas installations
- AS/NZS 1596 Storage and
handling of LPG gas
- AS/NZS 1869 Gas hose and
hose assemblies
- AS/NZS 3000 Wiring rules
• The appliance must be installed,
operated, and maintained according to
the manufacturer’s instructions
• Keep all ventilation strips on the
appliance free from obstructions
• Check the Appliance Data Plate to
ensure the appliance is suitable for the
intended gas type, before connecting
the appliance
General information
|
1.4 Manufacturer liability
The manufacturer declines all liability for damage to persons or property caused by:
• Use of non-original spare parts
• Use of the appliance other than as intended
• Tampering with any part of the appliance
• Not observing instructions contained in this Installation and User Manual
• Do not use combustible materials when
constructing enclosures or surrounds
• Ensure there is at least 1200 mm
clearance above the appliance. Do
not locate the barbecue underneath
combustible structures or materials
• Maintain a minimum of 12VDC for correct
appliance operation
• When installed
indoors
, gas bottles
must be housed in a separate, ventilated
enclosure separately from the appliance,
under the requirements of AS/NZS 5601
and or AS/NZS 1596
• When installed outdoors and gas bottles
are located in the same structure as the
appliance, bottles must be contained in
a ventilated enclosure, separate from
the appliance and any ignition source,
in accordance with LPG regulations.
The minimum gas bottle size is 9 kg
• When installing an underground gas
supply, use AS/NZS 5601 or equivalent
local regulations to determine gas
piping specifications. Terminate with a
Standpipe and Gas Cock