Christie 1204, Инструкция по установке и эксплуатации

Страница: 17 / 46

Installation Manual 6837_00
17
Installation
|
2.2 Preinstallation
Gas Supply
• Check the Appliance Data Plate to ensure it is suitable for the intended gas supply
• Ensure adequate pipe size and sufficient gas supply pressure is available for the MJ/h
rating of the appliance
• The CC2 Gas Cooktop is supplied with a bayonet hose connection and a bayonet floor
socket with a 15mm BSP connection. Make provision for these connections
• The reticulated gas supply must conform to AS/NZS5601. Do not locate the underground
gas supply pipe directly beneath the cooking surface area. Do not route or lead the Gas
Supply Pipe underneath the drain tube
• When installing the cooktop into a prefabricated Christie cabinet, refer to the installation
instructions for that particular product to determine where underground services should
be terminated
• Where it is not possible to install reticulated gas, provision should be made for bottled gas
and must conform to AS/NZS 5601 Gas installations
- AS/NZS 1596 Storage and handling of LPG gas
- AS/NZS 1869 Gas hose and hose assemblies
Ventilation
• Louvres in the Christie access door and perforations in the gas cooktop provide ventilation.
The space under the hotplate lip provides exhaust ventilation. This ventilation gives
essential airflow for the gas to burn correctly, and to limit heat build-up inside the unit
• Custom built-in structures must allow for ventilation, as per section 6.4.4 air requirements
for gas appliances in the Gas Code
• The structure must prevent wind from blowing laterally across the underside of the
appliance and disturbing the burner flame
This appliance must only be installed and serviced by a licensed gasfitter or suitably
qualified person. They will be directly responsible for installing it according to the
manufacturers’ installation instructions, as well as AS/NZS5601, with specific attention to
the requirements of Clause 6.4.4.1, 6.10.1.7, 6.10.2 and 6.10.2.3, any Local Gas Fitting
Regulations, Municipal Building Codes, Electrical Wiring Regulations, and any other
applicable statutory regulations.