Christ ALPHA 1-2 LDplus Скачать руководство пользователя страница 63

Страница: 63 / 102

Freeze-dryer Alpha 1-4 LDplus

Freeze-dryer Alpha 2-4 LDplus

8 Maintenance and service

Version 11/2006, Rev. 2.2 of 17/10/2016

• sb

63 / 102

Translation of the original operating manual

• Check the material regularly (at least once a month) for

–  cracks
–  visible damage of the surface
–  pressure marks
–  signs of corrosion
–  other changes.

• Replace any damaged components immediately for your own safety.
• Immediately rinse off the accessories if any liquids that may cause

corrosion come into contact with them.

• Clean the accessories outside the freeze-dryer once a week or

preferably after each use.

Pos : 188 /010 Uni vers almodul e/ Leerz eile @ 0\ mod_1202116244500_0.doc x @ 114 @ @ 1

Pos : 189 /010 Uni vers almodul e/ Leerz eile @ 0\ mod_1202116244500_0.doc x @ 114 @ @ 1

Pos : 190 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/080 Wartung und I nst andhaltung/ 080-0020 D esi nfektion von Tr oc knungs kammer und Z ubehör @ 25\ mod_1404984107851_68. doc x @ 184461 @ 2 @ 1



8.2

Disinfection of the drying chamber and accessories

• Use commercially-available disinfectants such as, for example, Incidur



Meliseptol



, Sagrotan



, Buraton



, or Terralin



(available at specialised

trade).

• The freeze-dryers and the accessories consist of various materials. A

possible incompatibility must be considered.

• Before using cleaning or decontamination agents that were not

recommended by us, contact the manufacturer to ensure that such a
procedure will not damage the freeze-dryer.

• Please contact us if you have any queries (see chapter 7.3 - "Service

contact").

DANGER

If dangerous materials (e.g. infectious and pathogenic substances) are
used, the freeze-dryer and accessories must be disinfected.

Pos : 191 /010 Uni vers almodul e/ Seit enwechs el @ 0\ mod_1202116244312_0.doc x @ 105 @ @ 1

Содержание ALPHA 1-2 LDplus







































































































Результаты поиска

Содержание ALPHA 1-2 LDplus

Отзывы:

Похожие инструкции для ALPHA 1-2 LDplus

Бренды по названию

Популярные бренды

Christ ALPHA 1-2 LDplus, Руководство по эксплуатации

Результаты поиска

Содержание ALPHA 1-2 LDplus

Отзывы:

Похожие инструкции для ALPHA 1-2 LDplus

Бренды по названию

Популярные бренды