Shutter Installation/Cord Routing and Wiring
Installation and Operators Instruction Manual
1.See Wiring diagram on Motor for Motor electrical connections. Follow local, state, and national electrical codes
for wiring
2.Install an electrical disconnect within reach of each Fan.
3.Route the motor cord (not supplied) toward the upper left corner of the Fan and attach the cord to the Motor
Mount using the three Cable Ties—included in the hardware package.
4.Cut a 3/8" [9.53 mm] slot in the upper left flange of the Shutter frame in order to route the electrical cord out the
back.
5.Position the Shutter, centered in the Fan Shroud, and rotate the Shutter Clips to lock the Shutter into place. Check
the Shutter for proper operation. The Shutter must be able to open and close freely without obstructions.
6.Some installations may require an exit hole for the motor cord to be drilled in the side of the Shroud. These
installations must have electrical wires routed through conduit.
Note:Make sure the conduit or wires do not interfere with the Fan Blades or Shutter operation.
Shutter Installation/Cord Routing and Wiring
Key
Description
1
Shroud
2
Shutter
3
Shutter Clip
4
3/8" Slot to Route Motor Cord
1
2
3
4
5