Installation and Operators Instruction Manual
Installation
Installing the Cone and Grill to the Fiberglass Fan
1. Slide the Cone onto the Shroud—the Shroud fits inside the Cone.
(See Figure below)
4" slots are cut into the edge of the cone to allow expansion as the Cone is slid onto the Shroud.
2. Align the holes in the Shroud with the slots in the Cone.
3. Insert the (6) Wafer Head Bolts from inside the Shroud through the Cone and thread the Flange Nuts onto ends of
the Wafer Head Bolts.
4. Snap the Cone Grill into the slots on the outlet end of the Cone.
2
5
4
3
4
1
Key
Description
Part No.
1
Shroud (White)
37914
Shroud (Black Interior)
46631
2
1/4-20 SS Hex Ser. Flange Nut 46298
3
Cone Grill
PT5029
4
Cone (White)
38268
Cone (Black)
46630
5
1/4-20 x 7/8 Wafer Head Bolt 40775
4