Chord ULTIMA 6, Руководство пользователя

Страница: 5 / 24

Chord Electronics
ULTIMA 6 | Manual
_
Protection against
liquids & heat
1.2
The ULTIMA 6 is not
protected against liquids
of any kind. Never place
containers of liquid on ULTIMA 6.
Never allow ULTIMA 6 to come
into contact with moisture or
liquids; doing so could result in
electrocution or damage to the
ULTIMA 6 internal circuitry.
Be aware that liquids, including
water that has dried, can leave
minerals that can affect the
PCB and other components,
which could eventually lead to
oxidisation and short-circuiting.
If the ULTIMA 6 comes into
contact with moisture or liquids,
immediately disconnect from
the mains power supply, and
connected equipment, and
contact Chord Electronics for
further advice.
The ULTIMA 6 has
internal thermal
protection that will cut
the power supply if reached.
Never operate the ULTIMA 6 near
sources of heat or naked flames
as this will decrease the lifespan
of the internal components. It is
advised that you do not operate
the ULTIMA 6 in an area of direct
sunlight or on top of significant
heat- producing devices.
Please be aware that it is
entirely normal for the ULTIMA
6 to become warm during
use, particularly within a
stacked configuration. If you
are concerned about the
temperatures, please switch
the device off and consider a
different placement.
1.1 Introduction
1.2 Protection against
liquids & heat
1.3 Dismantling & radio frequency
interference
1.4 Connecting your equipment
5 // 24