Chord ULTIMA 6, Руководство пользователя

Страница: 20 / 24

Chord Electronics
ULTIMA 6 | Manual
_
As ULTIMA 6 is a stereo amplifier,
it supports 2 speaker outputs.
In order to connect ULTIMA 6 to
loudspeakers, use high-quality
loudspeaker cable terminated
with 4mm banana plugs or 6mm
spades. Bare wire can be used,
but it is not recommended.
4.1 Placement
4.2 Connecting ULTIMA 6 to
ancillary equipment
4.3 Audio inputs
4.4 Audio outputs
4.5 Power-on sequence and 12V
trigger
4.6 Earthing issues in Europe
4.7 Adjusting the brightness of the
LED‘s
Audio outputs 4.4
20 // 24
Connect the black (negative)
terminal from ULTIMA 6 to
the negative terminal on your
loudspeaker and the red
(positive) terminal from ULTIMA
6 to the red positive terminal on
your loudspeaker. Please pay
careful attention to the diagram
below when plugging in your
speakers.
Right channel
positive speaker terminal
Right channel
negative speaker terminal
Left channel
positive speaker terminal
Left channel
negative speaker terminal
WARNING:
Please
pay attention to
the polarity on
your speakers and the
layout of the Ultima 5
outputs. Ensure that
all wires are correctly
placed.