Chopin QUATUOR, Руководство пользователя

Страница: 61 / 74

QUATUOR
Section 5 Maintenance 61
User’s manual

10/2016
Section 5. Maintenance
1. Periodic
maintenance
■
The quality of the analyses performed by the QUATUOR is highly
dependent on the quality of the sieves assembly. It is therefore re-
commended to store, handle and transport the corresponding con-
stitutive parts with great care.
■
The QUATUOR does not require particular preventive mainte-
nance: a self-test is ran at each power-up of the unit. However re-
commendations hereunder shall be taken into account:
❏
Listen to any possibly abnormal noise and proceed as necessary
to manual simulations from the maintenance menu ( "Activating ele-
ments of the QUATUOR", page 48 ).
❏
At least once a month proceed with a cleaning of the QUATUOR:
worm screw, sieves, drawers, hoppers, touch screen, casing, etc.
❏
Regularly, make sure the sieve holes are not obstructed. In case
the holes are clogged with grains, please clean the sieve.
Unplug the electrical supply when supplying is not required.
Note 1.
The external surfaces of the QUATUOR are cleaned using a
damp cloth.
Never use a solvent
2.
It is recommended to blow out from time to time light impurities
remaining into the QUATUOR, and make them fall into the
receptacle at bottom of the unit. Make use of low pressure com-
pressed air at inlet hopper level.

Entitled repair shop
It is recommended to proceed once a year to an overhaul of the
equipment. This shall be carried out by a Chopin Technologies enti-
tled repair organization.