CHIWAI Quan Wei, Инструкция по использованию и обслуживанию, Страница: 34 / 90

30
Gas loading
pressure（Mpa）
00.80
1. The pressure is higher than this value, and is in the loading
operation state, controls the air compressorto
unload the movement.
2. The setting value of gas supply loading pressurecan not be greater
than this value, and the "gas supply and unloading pressure" is
limited by the "high unloading
pressure limit" in the manufacturer's parameters.
Fan motor start
temperature（℃）
0080
Whentheexhausttemperatureishigherthanthesetvalue
of the air compressor, control the fan operation.
Fan motor stop
temperature（℃）
0070
When the exhaust temperature of the air compressoris
lower than the value set here, stop the fan from running.
Motor Starting
delay time（s）
0008
Setthestartingtimeofthe motor,startthetimewhen the
motor starts, in this time, the motor current
overload is not protected.
Fan motor Starting
delay time（s）
0003
Set the starting time of the fan motor, start the time when the fan
motor starts, in this time, the fan motor
current overload is not protected.
Star angle delay
time（s）
0006 motor star angle step-down start delay time.
Loaddelaytime（s） 0002 After the motor angle runs, the delay loading time.
Empty load delay
time（s）
0600
Air compressor allows the longest continuous no-load operation
time, after this time automatically stop
running, into the empty car too long stop state.
Shut down delay
time（s）
0010
Whennormalshutdown,theaircompressorimmediatelyno load
operation,noloadoperationthissettingtimeafter
the stop operation.
Restart delaytime
（s）
0100
Afterthe normal stop, the empty car stops fortoo long or the
malfunction stops, the air compressor can be
restarted only after the time is set up here.
Drainage opening
delay time
（
s
）
:
0002
When automatic drainage control, continuous drainage
time (spare).
Drainage off delay
time
（
min
）：
0060
When automatic drainage control, drainage interval
(spare).
Soft start delay time
（
s
）：
0006
After this delay time, enter the loading delay time. (This parameter
only works if the model is set to soft
start).
Load mode
：
Manual/Auto
matic
Mode: the pressure is higher than the "unloading pressure"
automaticallyunload;therestofthecases,by
the loading and unloading key control.
Mode:thecontrollerautomaticallycontrolstheloading and unloading
of the air compressor according to the pressure and the set loading
and unloading pressure.