Page 14 of 16
IRIS Touch
Quick Installation & Maintenance Guide Version 1.1
8.
Specifications
Transmission paths
600
620
Ethernet
Standard
̶
UTP 10/100 Base T with auto
Connection
̶
Rj45 socket for CAT5 cabling
IP addressing
̶
Dynamic (DHCP) or fixed
Connection fault detection
̶
Loss of Ethernet synchronisation
GPRS
(3G/4G/CDMA
optional on request)
Standard
Quad band GSM
850/900/1800/1900 MHz
̶
Connection
SMA socket for GSM
antenna connection
̶
Connection fault detection
Loss of registration with
network
̶
IP
TCP ports (outbound)
53165 (Alarms & Polling), 51292 (Diagnostic & Reflashing),
Alarm transmission
Interface to monitoring centre
IRIS Secure Apps or IRIS Management suite
Serial interface to alarm panel
RS485, RS232 (TTL), RS232 x 2
PIN Inputs interface to alarm panel
Maximum input voltage range 0V to +24V
Input ‘low’ (alarm) threshold < 1V
Input ‘high’ (restore) threshold > 2V
Internal pull-up impedance 10K to 3.3V supply
Alarm protocols
SIA (level 1 to 3)
Contact ID
Fast format (Scancom)
Tamper detection reporting to monitoring centre
Serial interface, Pin inputs
Fault reporting to monitoring centre
Transmission interface/path fault
Relay outputs
Maximum operating voltage
24V DC
Maximum current rating
100mA DC
Power supply
Supply voltage
9V to 28V DC
Note: For Radio & Telecoms Terminal Equipment Directive
no longer than 3 meters in length
Typical current
97mA @ 12V DC
98mA @ 12V DC
Maximum current
1A @ 12V DC
Recommended external PSU
12V DC 1A 12 Watt
Environmental
Operating temperature range
-10°C to 55°C
Operating humidity range
95% max., non-condensing
Weights and dimensions
Physical dimensions
12 cm x 9 cm
PCB weight
60 grams
Fully packaged weight
160 grams
640
UTP 10/100 Base T with auto-negotiation
Rj45 socket for CAT5 cabling
Dynamic (DHCP) or fixed
Loss of Ethernet synchronisation
Quad band GSM
850/900/1800/1900 MHz
SMA socket for GSM
antenna connection
Loss of registration with
network
1292 (Diagnostic & Reflashing), 10001 (Upload / Download)
Note: For Radio & Telecoms Terminal Equipment Directive the power cable needs to be
no longer than 3 meters in length
106mA @ 12V DC
condensing
IRIS Touch
Quick Installation & Maintenance Guide Version
1.
Introduction
The IRIS Touch
offers cost effective Alarm over IP (AoIP) for the commercial and residential sectors.
All IRIS Touch
diallers are certified as suitable for all Grade 4 systems with an Alarm Transmission
System (ATS) configuration up to SP6 for single path, or ATS configuration DP4 for dual path (IRIS
640 only).
The IRIS Touch
is based on Chiron’s successful IRIS Touch range of AoIP diallers with the same
hardware and software used in all IRIS diallers; with the same level of security and features provided to
military, governments, banks and commercial industry markets.
The IRIS Touch
offers both polling and alarm via Ethernet or GPRS (3G, 4G and CDMA on
communication paths to the monitoring centre.
This manual describes a quick guide to the installation of products from the IRIS Touch
Engineer manual, including multi-lingual versions, please visit our website at:
http://www.chironsc.com/downloads_security.html
2.
Product Features
Features
IRIS Touch
600
620
Ethernet
̶̶
1
GPRS
̶̶
Relays
4
4
Inputs (Pins)
6
6
Serial RS485
Serial TTL
RS232 (Basic or Full)
2 x Basic
Text messaging
̶̶
Multi language menus
VoIP & SIP services
Option available on request
3G / 4G / CDMA
Version 1.1
Page 3 of 16
commercial and residential sectors.
systems with an Alarm Transmission
dual path (IRIS Touch
is based on Chiron’s successful IRIS Touch range of AoIP diallers with the same
; with the same level of security and features provided to
polling and alarm via Ethernet or GPRS (3G, 4G and CDMA on request)
This manual describes a quick guide to the installation of products from the IRIS Touch
. For the full
640
1
4
6
