ChiQ WFL8T48W2, Руководство пользователя

Страница: 11 / 28

Installation
9
Electric connection
Before plugging the appliance into the mains socket,
make sure that:
·
The socket is earthed and in compliance with the
applicable law.
·
The socket is able to sustain the appliance’s
maximum power load indicated on the Technical
Date Plate fixed on the machine.
·
The supply voltage is included within the values
indicated on the Technical Date Plate fixed on the
machine.
·
When heating, the maximum current of the
washer-dryer is 10A, so please make sure that
the power supply system (voltage, current and
the cable) is applicable to the load of the applied
appliance.
·
The socket is compatible with the washer’s plug.
If this is not the case, replace the socket or the
plug by a qualified electrician.
WARNING----THIS APPLIANCE MUST BE EARTHED.
THE FOLLOWING OPERATIONS SHOULD BE
CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Do not use extension cables, multiple sockets or
adapters.

To remove the plug from the socket, grasp the
plug firmly and pull it out. Do not pull at the cable.

The electrical components must not be accessible
to the user after installation.

Do not connect the machine to electrical outlets
while your hands are wet or damp.

Do not operate this appliance when you are wet or
barefoot.

Do not operate this appliance if it has a damaged
power cable or plug, if it is not working properly, or
if it has been damaged or dropped.

WARNING! The company denies all liability if and
when these norms are not respected.
The water consumption of a cold wash cycle is no higher
than a warm cycle.