ChiQ CPS570E, Руководство по эксплуатации

Страница: 9 / 94

EN
8
1.Functions
1.1 Temp. setting
1
）
Fridge temperature setting
Press the Temp. Zone key to select the fridge zone until the corresponding icon gets flickering, and then press the
Temp. key to set the temperature as desired, finally, press the OK key or wait for 5s to validate the setting.
The fridge temperature setting cycles as following:
5→6→7→8→OF→2→3→4→5
OF indicates the fridge is switched off, and when the OF function takes effect, the fridge will stop cooling.
Be sure to take all foods out of the fridge compartment before setting this function.
2
）
Freezer temperature setting
Press the Temp. Zone key to select the freezer zone until the corresponding icon gets flickering, and then press the
Temp. key to set the temperature as desire, finally press the OKkey or wait for 5s to validate the setting.
The freezer temperature setting cycles as following:
-18→-17→-16→-24→-23→-22→-21→-20→-19→-18
1.2Fast Freeze
1)When the Fast Freeze function is enabled, the freezer temperature will be controlled at -32
℃
automatically, and after
26 hours of running, the Fast Freeze function gets exited. Cooling down the freezer temperature in a rapid manner is
beneficial to the prevention of food nutrition against lost and the preservation of freshness.
Under the Fast-Freezing mode, the freezer temperature is subjected to no adjustment.
2) Enabling the Fast-Freezing function

Press the Function key to select Fast Freeze until the corresponding icon gets flickering, and then press the OKkey
within 5s for confirmation. If the OKkey is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast-Freezing function

After a cumulative running period of 26 hours, the Fast Freeze function will exit automatically.

Under the Fast Freeze mode, press the Function key to select Fast Freeze until the corresponding icon gets
flickering, and then press the OK key for confirmation, the Fast Freeze function will get exited.
 When the Smart function is enabled, the Fast-Freezing function will be disabled automatically.
1.3Smart
1
）
When the Smart function is enabled, the temperature of the fresh food compartment is controlled at 4
℃
, and that of the
freezer compartment at- 18
℃
, so that foods can be stored in the best condition while the refrigerator is running more
efficiently and with better performance.
Under the Smart mode, the fresh food compartment temperature and the freezer compartment temperature
are subject to no change.
2
）
Enabling the Smart function
 Press the Function key to select Smart until the corresponding icon gets flickering, and then press the OK key within
5s for confirmation. If the OK is not pressed within 5s, the setting will be invalidated.
3
）
Exiting the Smart function

Under the Smart mode, press the Function key to select Smart until the corresponding gets flickering, and then press
the OK key for confirmation. The Smart function will get exited.

When the Fast Freeze function is enabled, the Smart function will be disabled automatically.
1.4Child Lock(For the product of the PCM plate door only)
When the Child Lock function is enabled, the temperature and function are subjected to no change to prevent
maloperation.
1
）
In case of no key operation within 3 minutes, the Child Lock function will be enabled automatically.
2
）
Exiting the Child Lock function manually
 Press and hold down the Unlock for 3s, then the Child Lock function can be disabled.
(Note: The Child Lock function is not available with the product of the glass panel door.)
1.5 Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped when any
key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted until the door is
closed.
1.6 Power cut memory
In the case of power failure, the refrigerator will maintain the running state that is set before the power outage when the
power supply is restored.