SPECIALISTS IN DIGITAL TELECARE
7
chiptech.co.nz
4
Buttons and Indicator Lights
4.1
Power
POWER
The
Power
button is backlit green to indicate that SEVEN is on.
Press the
Power
button to hear the power status spoken.
Hold the
Power
button to turn the base unit off, press to turn it on.
On
Flashes orange when the mains power is disconnected. A voice message will play after three
mins of no mains power, and an alert is sent to monitoring following a period* of time, typically
1-4 hours.
•
Solid red when the base unit battery is no longer functioning, or the battery is missing.
•
Flashes red when the base unit battery is low.
No light
–
base unit is off.
INSTALLER
INFO
The Power button is used for turning the base unit on from battery power, turning the base unit off, and
resetting the base unit to return it to its normal operating mode.
4.1.1
Turn On
•
Plug SEVEN into mains power to automatically start the unit. SEVEN will play a voice file and
the Power button will display green
(recommended process).
•
It is not recommended to start SEVEN on battery.
If you need to do so,
press the Power
button for three (3) seconds, SEVEN will speak, and the Power button will flash orange.
4.1.2
Turn Off
•
Unplug the SEVEN plug pack from the wall, then press and hold the Power button. Keep
holding the Power button until SEVEN has beeped four (4) times (with the final beep in a
lower tone). The beeps help you determine how long to hold the button before it switches
off.
•
The Power indicator will have no lights showing when the unit is turned off correctly.
NOTE:
If configured to do so, SEVEN can be turned off even if the mains power is still supplied.
CAUTION:
When SEVEN is turned OFF and there is NO Power indicator, then the system
WILL NOT
operate.
4.1.3
Restart
•
Turn off SEVEN using the Power button as described above.
•
When SEVEN has turned off, press and hold the Power button until the Power button
indicates that the base unit has restarted. No settings will be lost when performing this
function, but alerts to monitoring will be cleared, and normal operation will be restored.
NOTE:
When
‘Power off only if mains removed’ is
set in the configuration, then the restart
process the mains power plugged in and hold the Power button for three (3) seconds.