3
3 – ASSEMBLY AND REMOVAL OF THE FRONT WHEELS
Install the front wheels to the openings in front tubes, as shown (C1). When the wheels are fixed you
will hear a click.
To remove the wheels press the button (С) and remove the wheel (С2).
4 – FRONT AND SWIVEL MOVEMENT OF FRONT WHEELS
To activate straight movement function move the switch down.
To activate swivel movement, slide the switch up.
Note:
When pushing the stroller on uneven surfaces, the front wheels must be moving straight.
5 – PARKING DEVICE
IMPORTANT!
Always activate the parking device while stroller is not in motion in order to avoid sudden
sliding and injuries!
6 – BACKREST RECLINE ADJUSTMENT
Press the button on backrest to adjust the recline position up or down.
WARNING!
BABIES UNDER 6 MONTHS MUST BE PLACED ON THE SEAT ONLY WITH
THE BACKREST, ADJUSTED IN THE MOST RECLINED (FLAT) POSITION!
7 – ASSEMBLY AND DETACHMENT OF FRONT BUMPER
Place the two ends of the front bumper to the openings in the frame and press until you hear a click.
In order to detach the bumper press the buttons on both sides and pull out the bumper.
8 – CANOPY FOLDING AND UNFOLDING
Push the canopy with your hand in order to fold it.
Pull out the canopy with your hand in order to unfold it.
9 – LEG REST
Press the two buttons on the leg rest simultaneously (G and K) and move the leg rest to lower position.
To lift the leg rest, just push it with your hand until you hear a click sound.
10 – RESTRAINT SYSTEM (safety belt)
To unfasten the safety belt, press the central buckle and split the belts.
ATTENTION!
Belts must be snug to child’s body and must not be twisted. Adjust the length of the belts
accordingly.
The shoulder belts may be adjusted in two height levels. To position the belts in lower level, detach the
shoulder belts form the central buckle, remove the shoulder pads and thread the belts thought the two
hoops.
WARNING!
Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
ATTENTION!
When using the seat for newborn baby, before placing the child into the stroller, you must
unfasten the belt and put the shoulder and waist traps to the sides of the stroller and cover them with
thin pad or a mattress not thicker than 10 mm.
11 – FOLDING THE STROLLER
IMPORTANT!
Before folding the stroller the paring device must be engaged and the storage basket
should be empty.
Pull with your thumb the button in direction D and simultaneously press with your other fingers the
button E. Press gently the handle and the stroller will fold on its own.
