background image

3

  If you find defect or damage in the construction, discontinue usage until removal of the damaged 

 

  parts and replacement with new ones.

  After a violent impact the car seat and belts may be damaged. therefore, it is recommended to 

 

  replace the car seat with new one.

  Never use a second hand child restraint. It may have suffered structural damage, which may make 

 

  the child restraint extremely dangerous.

  Do not use this car seat without its seat cover and do not replace it with a new one, unless supplied  

  by  the  manufacturer.  The  fabric  parts  are  integral  parts  of  the  restraint  system  and  its  safety 

 

 features!

  Always make sure that you are not carrying any unsecured objects, especially on the back shelf, 

 

  which, in case of an accident, may injure the car’s occupants.

  Do not put additional pads except the ones supplied from the manufacturer! Placing additional pads 

 

  may obscure the safety of your child.

  It is recommended to cover the car seat if the vehicle is parked under strong sun shine – extreme 

 

  sun exposure will make the plastic to deteriorate and the fabric to fade. Please, check that the child 

 

  restraint has not become too hot before placing your child seat.

  Do  not  attach  objects  with  long  cords  or  strings  on  the  car  seat  in  order  to  avoid  danger  of 

 

 suffocation!

  Never place a child seat on beds, couches or similar soft surfaces!

  Do not allow children to play with the product!

  Do not remove stickers and warnings – they contain important information!

  The packaging of the product must be kept out of the reach of children at the time of and after 

 

  unpacking in order to avoid the risk of strangulation!

  Child  restraint  system  suitable  for  children  weighing  22-36  kg,  Group  III  –  22-36  kg 

 

  (approx. age 6-12 years);

  Car seat can be installed on the vehicle seat using 3-point vehicle safety belt;

  Car  seat  can  be  installed  on  the  vehicle  seat  using  3-point  vehicle  safety  belt  and  ISOFIT 

 

  atachments;

  Child restraint must be installed in FORWARD facing position.

 

PRODUCT FEATURES

 

MAIN PARTS

А – Car seat body

В – Fabric cover

С – ISOFIT attachments

D – Button to release the 

ISOFIT attachments

Содержание ARCHIE ISO












Отзывы: