NOTE: If you do not use your camera for a long period of time, remove the batteries, and store in
a dry location. This will prevent the possibility of battery leakage and damage to your camera. Do
not use Ni-Cad batteries. Be sure to replace both batteries at the same time when the batteries are
too weak to operate the camera.
HOW TO OPEN THE LENS COVER
1. Hold the flash unit and slide it all the way to open the lens cover (Fig. 3).
2. Slide it back in the opposite direction to close the lens cover (Fig. 4).
NOTE: All electrical circuitry is off when the lens cover is in the closed position. Even in the
closed position, the power will not be off unless the winding or rewinding function is completed.
The shutter will not be released unless the lens cover is fully opened.
BATTERY TESTING
1. Cover the exposure metering window with your hand and press the shutter release
button halfway. (Fig. 5).
2. Make sure the under-exposure warning LED (red) blinks (Fig. 6). If the red LED fails to
illuminate, the batteries are too weak and need to be replaced.
NOTE: As temperature decreases, especially below SAC, battery performance declines. Keep
batteries warmed under these conditions.
www.orphancameras.com
