1. Slide the Flash Switch in the direction of the arrow.
2. Make sure that the Flash Ready Indicator is illuminated, then shoot (Fig. 22). - When
the flash photography is completed, slide the Flash Switch in the direction of the arrow
(Fig. 23). The Flash Switch can automatically return to the OFF position by closing the
lens cover.
NOTE: Even if the flash ready indicator illuminates, actual shutter release will only occur with a
fresh set of batteries. To check the strength of the batteries, slightly press the shutter release
button while covering the exposure meter window. The batteries are OK if the under exposure
warning LED blinks during this testing procedure. If the under exposure warning LED does not
blink, this is an indication that your batteries are weak and should be replaced immediately.
www.orphancameras.com
