24 / 39
FISIOLASER IRD/IRD 2
Pressing the encoder knob in correspondence of the “Format Smart-card” menu , the
formatting operation is executed ; for to avoid accidental cancellations , you must to
confirm the operation.
Pushing the function taste relative to the CANCEL button , you return to the screen
of fig. 18 or fig. 19 .
Pushing the function taste relative to the FORMAT button :
If the smart-card is not correctly inserted in its slot, the machine alerts you
with a warning message;
If the smart-card is correctly inserted in its slot, starting the format
operation. The operator is informed when the formatting operation is
finished.
LANGUAGE
Rotate the encoder knob until to position the cursor on the LANGUAGE menu ,
then press the encoder knob for to confirm the choice ; it appears the next screen
(see fig. 20) :
Fig. 20
For to choose the language where will be written all of the commands and messages
of the device :
Select the language rotating the encoder knob
Push the encoder knob on the selected language for to confirm the choice
For to abort the operation , push the function taste relative to the CANCEL
button ; you return to the screen of fig. 9
instead , for to confirm the operation , push the function taste relative to the
SAVE button for to load the new language
After a short wait while the new dictionary is loading, the menu will appear in the
selected language.
You can repeat the procedure at any time to change the language .
DIRECT PROCEDURE
This means you can create customised programmes on the spot. They cannot
however be stored .
Pushing the function taste relative to the FREE PROCEDURE button (see fig. 4) , it
appears the next screen ( see Fig.21):
Fig. 25
N.B.
Output channel 1 is the only one available in the FISIOLASER IRD .
Press the channel button to select the output channel .
The term Channel <1> that appears on the top left indicates that the displayed
programme will be operated from Channel 1. If you press the corresponding button,
the Channel <2> programme will be displayed .
The type of probe entered will also be noted.
On the right of the display you can monitor the status of both channels .
The last programme that was used on each output channel is shown on the page .
Save
Cancel
* * CHANNEL <1> * *
CHANNEL 1
MLA 1/25 Personalized
00:00
CHANNEL 2
00:00
Channel 2
Exit
