9
Getting Started (Cont.)
Charging
The battery has been partially charged at the factory. To perform all functions, we recommend
you fully recharge it as follows:
•
To charge the device with the battery charger
, plug the large end of the USB cable into
the charging adaptor and the smaller end into the micro USB port on the MID
Plug the charger into your mains power supply.
•
To charge the device using the USB cable and computer
, plug the large end of the
USB cable into a USB port on your computer and the smaller end into the micro USB
port on the MID. Ensure your computer is turned on.
•
When the tablet indicates a full charge (the battery status icon is located in the top right
corner of the display), disconnect the charger or USB cable.
•
Follow one of these charging procedures whenever your MID indicates a low
battery charge.
Switch on/off
Power button
•
Long press to turn on.
•
When in power-on state, press to turn on or off the screen.
•
When in power-on state, long press to display the power off menu.
NOTE:
If tablet becomes unresponsive, press the reset key,and power on the tablet
Switch on
•
While in power-off state, press and hold the power button for 2 seconds and the device
will start up.
Switch off
•
Press and hold the power button for 2 seconds: an options list will appear on the screen.
•
Choose to switch off the device.
Turn on/off the screen
The screen will automatically turn off when in idle time
•
After a period of inactivity the screen will automatically turn off to save battery power.
This can be set using the “Sleep” setting from the display menu in the device settings
menu.
Turn on the screen
•
If the screen is off, press the power button to turn it back on.
Volume
•
To adjust the ringer volume, press the Volume Up or Volume Down buttons on the right
side of the MID to the desired level. While adjusting the ringer volume, a
window will appear on the screen displaying the volume levels.
