1 FOR SAFE INSTALLATION WORK
Warning
• Do not cut or modify Mounting System. Doing so is dangerous. Safety cannot be
guaranteed.
• Stop work during stormy weather. Solar modules can be caught in the wind,
causing you to fall.
Caution
• Never step or sit on the glass surface of a solar module. The glass may break,
resulting in shock or bodily injury. The module may also stop generating power.
• Always use the supplied parts to attach the solar modules and mounts. Use of
weaker parts, such as screws that are too short, is dangerous and may cause the
solar modules or mounts to fall.
• Always use the specified tools.
The solar modules or mounts may fall if the installation is not strong enough, for
example when parts are not tightened sufficiently.
• Regardless of whether you are working on a new or existing roof, never allow the
sheathing to become wet. Protect
the sheathing from rain during the installation. Failure to do so may cause leaks.
• Always use the specified materials.
Use of other materials is dangerous. Materials other than specified can reduce
performance and can cause leaks, shock, and so on.
• Do not modify or cut parts.
• Do not install system in a location within 0.3 miles from the ocean or any salt
water.
• Do not install in corrosive locations classified C5 by ISO.
• Protective earth grounding of the individual photovoltaic modules is achieved by
the secure of the modules to the mounting frames. The assembly instructions should
be closely followed, in order to ensure a reliable ground connection.
• The framing system has only been evaluated by TUV for use with the photovoltaic
modules listed in this manual.
