HOIST
100 Series
Page 4
Issue
2.0
June 2018
Four Button Hand Control used on ‘Wispalong’ (WL) Hoist Models
The four button handset is used to control the raising and lowering of the carry bar and the powered
traversing along the ceiling track on
Wispalong models.
The traversing function is controlled by the or buttons, on the handset. The buttons are colour
coded with blue and yellow. These colours correspond to the blue and yellow direction travel arrows
on the underside of the hoist case.
To control the direction of the hoist, view the coloured direction arrows mounted on the hoist and press
the button on the hand control which corresponds in colour to the arrow on the hoist.
Six Button Hand Control used on X-Y Models
The 6 button hand control has the same function buttons as the four button hand control, with the
addition of the tracking for the X-Y system.
The tracking X-Y function is controlled by the bottom buttons on the handset. The buttons are colour
coded with red and green. These colours correspond to the red and green direction travel arrows on
the underside of the track ends.
To control the direction of the hoist, view the coloured direction arrows mounted on the hoist and track
ends and press the button on the hand control which corresponds in colour and direction to the arrows.
Two Button
Hand Control
Four Button
Hand Control
Six Button
Hand Control
Two Button Hand control used on Wispa (W) Hoist Models
The two button hand control is used to control the lifting and lowering of the carry bar on Wispa hoist
models. The lifting and lowering are controlled by the or buttons.
PLEASE NOTE: For all battery powered models, the hoist must be moved away from
the charging point at the end of the track before the lifting and lowering functions will
operate. Lifting and lowering functions are inoperable whilst the green charging LED
is lit.
Hand controls
The controls use air to operate the hoist and are therefore completely safe to use with wet hands.
