Childcare 036341-391, Руководство пользователя

Страница: 3 / 20

3
SAFETY PRECAUTIONS
WARNING
WARNING
SUFFOCATION HAZARD - INFANTS HAVE SUFFOCATED IN GAPS BETWEEN EXTRA PADDING AND SIDE
OF BASSINET/CRADLE AND ON SOFT BEDDING.
USE ONLY THE PAD PROVIDED BY MANUFACTURER.
NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING.
ENTRAPMENT HAZARD - TO PREVENT DEATH FROM ENTRAPMENT, BEDSIDE SLEEPER MUST BE
PROPERLY SECURED TO ADULT BED USING THE ATTACHMENT SYSTEM
If a sheet is used with the pad, use only the one provided by CNP Brands.
To reduce the risk of SIDS, paediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
A bedside sleeper is designed to provide a sleeping area for an infant until he or she begins to push up on
hands and knees or approximately 5 months of age. Move your child to another sleeping product when your
child reaches this stage.
STRANGULATION/SUFFOCATION HAZARD: The top edge of the lowering bar must be level with or below the top
of the adult mattress when used as the bedside sleeper. The level of the bedside sleeper bassinet mattress must
be a minimum of 10cm below the top edge of the lowering bar. NEVER raise the level of the bedside sleeper
bassinet mattress.
NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose.
They can cause suffocation.
Make sure all straps are secured and tight when used in the bedside sleeper position. Tighten straps periodically.
There must be no more than 1/2 inch (13mm) gap between bedside sleeper and adult bed.
Check tightness before each use by pulling bedside sleeper in a direction away from adult bed.
If gap exceeds 1/2 inch (13mm)
DO NOT use product. DO NOT fill the gap with pillows, blankets or other items
that are suffocation hazards.
ALWAYS read and follow assembly instructions for each product use mode (bedside sleeper, bassinet).
ALWAYS
use ALL required parts for each use mode. Check instruction manual for a list of required parts.
Periodically check product for loose, damaged, or missing parts.
The anchor plate and straps assembly must always be used in bedside sleeper mode.
NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/
fabric. Check before assembly and periodically during use. Contact CNP Brands for replacement parts. Never
substitute parts.
Assemble product according to manufacturer’s instructions for ANY use mode - bedside sleeper as well as the
bassinet.
To avoid death from the infant’s neck being caught on the top rail on the side that is next to the adult bed, the
top rail must be no higher than the adult bed mattress.
NEVER
permit bedding from the adult bed to extend into the bedtime sleeper.