Childcare 036341-391, Руководство пользователя

Страница: 12 / 20

12
ASSEMBLY / OPERATING INSTRUCTIONS
To fix to bed in Sleeper mode continued...
5
6
7
8
Move the sleeper close to the parent’s bed and
check the height of the sleeper compared with the
mattress on the bed.
The side support of the sleeper should always be
placed close to the parent’s mattress and the
mattress should always be aligned with the height of
the side support for restraint of the sleeper.
In order to fix the Sleeper to the parent’s bed in
bedside sleeping mode, use the attached pair of
fixing belts provided.
Slide the straps between the top mattress and
the base using a back and forth ‘sawing’ motion
and at the same time pulling downward until
the straps and anchor plates are in the desired
position.
The anchor plates should appear like the opposite
picture once they are assembled between the
mattress and the base.
Tighten the loop by pulling the belts firmly.
Adjust the belts separately until the sleeper is firmly in
contact with the parent’s mattress.
Store any excess of belts between the mattress and
the bed base.
5a.
5b.
6a.
6b.
7a.
8a.
8b.
8c.
CAUTION! Ensure the fixing belts are straight