14
Assembly / Operating Instructions
4. Attach armrest fabric cover by:
•
Sliding the fabric cover towards the bumper bar and press in to attach the second and
third plastic pegs (located underneath the fabric cover).
•
Hold the fabric cover firmly and press in to attach the first plastic peg. This will allow the
fabric cover to attach to the armrest completely.
To attach
first plastic peg
To attach second
plastic peg
WARNING:
To avoid injury, ensure both armrest’s plastic slot covers and fabric
covers are securely attached before placing baby in stroller.
To attach
third plastic peg
To remove infant carrier from stroller
1. Push both of the locking levers on the handle of the infant
carrier in and swing handle up until it “clicks” and locks into
place..
2. Lift the infant carrier upwards to remove from the armrest slots.
3. Close both armrest plastic slot covers. Ensure they are locked
into position by pushing them down into place.
