10
Assembly / Operating Instructions
Restraints - Harness
1. To secure the child in the harness, place left
hand buckle prong (b) on top of (a).
2. Hold both left hand buckle prongs (a) and (b)
together and insert it into buckle housing (e)
until it snaps into position.
3. Repeat previous steps for right hand buckle
prongs (c) and (d).
4. Once all attached, carefully adjust the harness
straps by pulling each slider (f) until the desired
fit is achieved in the lap, shoulder and crotch
straps.
5.
To release the buckles, squeeze the top and
bottom prongs (a) and (b), (c) and (d) together
until harness disengages.
CAUTION:
Always adjust the harness when
changing the seating position of the child.
Top strap
Bottom
strap
To adjust waist strap
1. To loosen waist strap, push up both top and
bottom straps through buckle as circled in
diagram.
2. To place waist strap in desired position, slide
the bottom strap into position then pull the top
strap and tighten into position.
(a), (b): Left hand buckle prongs
(c), (d): Right hand buckle prongs
(e): Buckle housing
(f): Strap adjustment sliders
Mesh canopy extension
1. Unzip the rear section of the canopy to use the mesh canopy
extension. Zip when not in use.
CAUTION:
The canopy must be fully closed before folding the
stroller.
f
f
f
f
f
a
b
c
d
e
