12
Assembly / Operating Instructions
Attaching infant carrier to stroller
This stroller is designed for use with Britax (Orion/Strider/Cruiser)
infant carrier.
1. Remove armrest’s fabric cover by:
•
Hold the fabric cover firmly and pull it away from the
armrest to release the first plastic peg (located underneath
the fabric cover).
To remove
first plastic peg
To remove
second plastic peg
To remove
third plastic peg
•
Then slide the fabric cover
towards the backrest of
the stroller and pull out to
release the second and
third plastic pegs. This will
allow the fabric cover to be
detached from the armrest
completely.
2.
Pull out all five straps of the five point safety harness from the
slots in the seat pad.
3. Reverse seat pad
4.
Re-thread all five straps of the five point safety harness into the
five slots in the seat pad.
5. Attach two press studs on the behind of the backrest.
Reversing seat pad (continued)
