3
Figure 1
STEP 1
STEP 2
Assemble Left Side Rails
Note: All Shelf Rails bolts will be fully tightened at
the end of Step 4.
Insert Dowel Pin (J) into upper hole of Top End Rail
Left (C).
Insert 30mm long Allen Head Bolt (K) through top
counterbored hole of Back Assembly (A) Into Top
End Rail Left (C) and snug bolt With Allen Wrench.
Note: Top Shelf Rail (E) has a wide groove in the
edge. Align Top Shelf Rail (E) with next top Hole.
Make sure groove is pointed to the inside of
Dressing Table and groove is closer to bottom edge.
Insert Allen Head Bolt (K) through
counterbored hole of Back Assembly (A) Into Top
Shelf Rail (E) and snug bolt.
Note: Lower Rails (F) have a narrow groove.
Align Middle/Bottom Shelf Rails (F) with next holes.
Make sure Shelf Rail groove is pointed to the
inside of Dressing Table and groove is closer to
bottom edge. Insert Allen Head Bolt (K) through
counterbored hole of Back Assembly (A) Into
Middle/Bottom Shelf Rails (E) and snug bolt.
See Figure 1.
Figure 2
Assemble Right Side Rails
Note: All Shelf Rails bolts will be fully tightened at
the end of Step 4.
Insert Dowel Pin (J) into upper hole of Top End Rail
Right (D).Insert 30mm long Allen Head Bolt (K)
through top counterbored hole of Back Assembly (A)
Into Top End Rail Right (D) and snug bolt.
Note: Top Shelf Rail (E) has a wide groove in the
edge. Align Top Shelf Rail (E) with next top Hole.
Make sure groove is pointed to the inside of
Dressing Table and groove is closer to bottom edge.
Insert Allen Head Bolt (K) through
counterbored hole of Back Assembly (A) Into Top
Shelf Rail (E) and snug bolt.
Note: Lower rails (F) have a narrow groove.
Align Middle/Bottom Shelf Rails (F) with next Holes.
Make sure Shelf Rail groove is pointed to the
inside of Dressing Table and groove is closer to
bottom edge. Insert Allen Head Bolt (K) through
counterbored hole of Back Assembly (A) Into
Middle/Bottom Shelf Rails (E) and snug bolt.
See Figure 2.
AB20066_G4
J
C
A
K
E
F
AB20066_G5
A
J
D
E
F
K
