Chiko SK-250AT, Инструкция по эксплуатации

Страница: 34 / 48

Chapter 3 Operation
32
3.2 Operation
CAUTION
Leave an interval of three minutes or more between ON/OFF switching.
Repeated ON/OFF switching at intervals of less than three minutes, in
particular less than 30 seconds, may cause failure.
1.
Turn on the MAIN POWER switch, and
check that the MAIN POWER indicator lamp
on the AT-panel is lit.
2.
Press the ON button on the AT panel.
The device starts operation.
3.
Check that abnormal noise is not generated
and the suction is appropriate.
4.
Set a desired suction power level by
pressing the Left/Right arrow buttons.
The performance power is indicated by the
suction power level lamps (Level 1 to 7).
Left/ Right arrow
buttons
Performance level
lamp