CHIEF WMA2S, Руководство по установке

Страница: 14 / 20

WMA2S Installation Instructions
14
7. Install mount covers to the mount following instructions in
Installing Mount Covers section.
Extension Adjustment
1. Loosen two bolts holding stop bracket in place on underside
of WMA2S mount. (See Figure 31)
2. Adjust mount to desired extension length. (See Figure 31)
3. Tighten two bolts holding stop bracket to secure mount in
desired position. (See Figure 31)
Figure 31
Lateral Shift Adjustment
1. Remove mount covers from the mount following instructions
in
Removing Mount Covers section.
2. Loosen two 1/4-20 x 5/8" hex head cap screws (P) on
underside of mounting bracket. (See Figure 32)
3. Adjust projector arm laterally to desired position. (See
Figure 32)
4. Tighten two 1/4-20 x 5/8" hex head cap screws loosened in
Step 4. (See Figure 32)
Figure 32
5. Install mount covers to the mount following instructions in
Installing Mount Covers section.
Security Screw Installation (Optional)
1. Remove eight #8-32 x 1/2" Phillips pan machine screws (T)
from wall bracket covers. (See Figure 33)
Figure 33
(bottom view)
1 3
2
(bottom view)
2
(P) x 2
4
3
3
1
(T) x 8
(Mount accessory arm not shown for clarity)