CHIEF WMA2S, Руководство по установке

Страница: 11 / 20

Installation Instructions WMA2S
11
4. Remove cable management cover (if necessary) from
WMA2S arm. (See Figure 19)
Figure 19
NOTE:
Cables may be routed from below and up wall bracket
channel, or from above and down behind and into wall
mount.
• Routing Cables from Below (Steps 5 and 6)
5. Open cable clips along bottom edge of wall bracket cross
bracket (See Figure 20)
Figure 20
6. Thread cable up wall bracket channel and into opened
cable clips. (See Figure 21)
Proceed to Step 7 .
Figure 21
• Routing Cables from Above (Step 7)
7. Thread cables down through a surface mount cable
accessory (not included), then behind and into the wall
bracket. (See Figure 22)
Proceed to Step 8
Figure 22
(bottom view)
4
Cable
management
cover
cable clips x 4
5
Cables (example)
Wall bracket channels
(view from back)
(view from front)
Surface mount
cable accessory
(not included)
Cables
Cables
7
7