TS525TU
Installation Instructions
8
4.
Install two concrete anchors (G) into two drilled holes. (See
Figure 7)
5.
Loosely attach wall rail (N) to wall by installing two 5/16- 2
1/2 flange head lag screws (F) into concrete anchors (G).
(See Figure 7)
IMPORTANT ! :
Use a level to make sure wall rail (N) is
level when mounted to the wall!
6.
Place two installation spacers (H) over two 5/16 x 2 1/2"
flange head lag screws (F). (See Figure 7)
7.
Tighten two screws to secure upper wall rail (N) to wall.
(See Figure 7)
Figure 7
8.
Slide main assembly (M) onto wall rail (N). (See Figure 8)
9.
Center main assembly (M) over wall rail (N). (See Figure 8)
10. Mark two holes at lower mounting holes. (See Figure 8)
11. Slide main assembly (M) off wall rail (N). (See Figure 8)
12. Drill two 3/8" holes at marked locations. (See Figure 8)
13. Install two concrete anchors (G) into drilled holes. (See
Figure 8)
Figure 8
14. Slide main assembly (M) back onto wall rail (N). (See Figure
9)
Figure 9
(F) x 2
(H) x 2
(N)
5
7
(G) x 2
4
6
11
8
center of wall rail
x 2
10
(G) x 2 (with main assembly removed)
13
12
x 2
(N)
(M)
14
(N)
(M)
