CHIEF RGTU-210, Руководство по установке

Страница: 2 / 8

2
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdrivers, No. 1 and No. 2 TIP
• Drill and bit set
• Wrench set
NOTE: Other tools may be required depending on the
method of installation.
PARTS LIST
Table 1: Parts List
REF DESCRIPTION QTY REF DESCRIPTION QTY
10 PLATE, Wall with two latches attached 1 140 SCREW, Phillips, M4 x 20 (Parts Bag D) 8
20 BRACKET, Interface (Rt) 1 150 SCREW, Phillips, M4 x 25 (Parts Bag D) 8
30 BRACKET, Interface (Lft) 1 160 WASHER, Flat, #10 (Parts Bag E) 8
40 BRACKET, Tilt Assembly 2 170 WASHER, Flat, 1/4” (Parts Bag F) 8
50 SCREW, Phillips, M8 x 20 (Parts Bag A) 6 180 SPACER, 1/4” (Parts Bag G) 8
60 SCREW, Phillips, M8 x 30 (Parts Bag A) 6 190 SPACER, 1/2” (Parts Bag G) 8
70 SCREW, Phillips, M8 x 45 (Parts Bag A) 6 200 WASHER, Shoulder, .195”ID
(Parts Bag E) 8
80 SCREW, Phillips, M6 x 25 (Parts Bag B) 8 210 WASHER, Shoulder, .320”ID
(Parts Bag F) 8
90 SCREW, Phillips, M6 x 16 (Parts Bag B) 8 220 SCREW, Self-Tapping 2
100 SCREW, Phillips, M5 x 16 (Parts Bag C) 8 230 BOLT, Carriage, 1/4-20 x 1/2” 6
110 SCREW, Phillips, M5 x 20 (Parts Bag C) 8 240 NUT, Nylock, 1/4-20 6
120 SCREW, Phillips, M5 x 25 (Parts Bag C) 8 250 BOLT, Lag, 5/16” 4
130 SCREW, Phillips, M4 x 16 (Parts Bag D) 8 260 WASHER, 5/16” 4
A S S E M B L Y D I A G R A M
LARGE SCREEN DISPLAY MOUNT
(RGTU-210)