CHIEF RGTU-210 Скачать руководство пользователя

Страница: 6 / 8

INSTALL WALL PLATE

Install the wall plate as follows:

WARNING: It is the responsibility of the installer to verify that

the structure to which the mount is anchored will
safely support five times the combined load of all
attached components and equipment.

1. Determine suitable a mounting location and lift the wall

plate (10) into place (see Figure 8).

2. Using a small nail or screw (not provided) in the center

hole, lightly hold wall plate at the mounting location (see
Figure 9).

3. Level the wall plate (10) and drill pilot holes for anchoring

the wall plate. If drilling into wood studs, use a 15/64” drill
bit.

4. Using four 5/16” lag bolts (250) and 5/16” washers (260),

install the wall plate on the wall.

5. Slide the latches to the outside (see Figure 10).

Figure 8. Wall Plate Dimensions

I N S T A L L A T I O N

I N S T R U C T I O N S

Figure 10. Slide Latches Outward

Figure 9. Wall Plate Installation

Содержание RGTU-210

Страница 3: ...3 220 230 240 250 260 Figure 1 Parts 10 20 30 40 40 PARTS A S S E M B L Y D I A G R A M LARGE SCREEN DISPLAY MOUNT RGTU 210 ...

Страница 5: ...he center hole of the tilt assembly as close to the center line of the display as possible see Figure 7 positioning the assembly with the knob side toward the outside of the display I N S T A L L A T I O N I N S T R U C T I O N S Dimensions shown are for example only NOTE Figure 6 Center Line of Display Figure 7 Attach Tilt Brackets ...

Страница 7: ...ure 11 and Figure 12 2 Secure the display by sliding the latches one on each side inward see Figure 13 3 If desired install self tapping screws 220 and or pad locks not provided for additional security see Figure 14 I N S T A L L A T I O N I N S T R U C T I O N S Figure 11 Hooks On Top View 1 Figure 12 Hooks On Top View 2 Figure 13 Slide Latches In Figure 14 Added Security ...

Страница 8: ...PART NO 8805 000069 Rev B 07 04 ...