CHIEF RFWD-110, Руководство по установке

Страница: 4 / 6

CAUTION: Over-tightening adjustment bolt will
cause excessive wear and may
distort adjustment components.
To adjust the tension of the spherical movement,
the arm movement, and the lateral movement:
1. Slightly tighten or loosen the tension
adjustment bolt indicated at the right.
2. Check for desired tension.
3. Repeat as necessary.
I N S T A L L A T I O N I N S T R U C T I O N S ( C o n t i n u e d )
A. Place the top of the mount on top of the wall bracket (90) and push
the bottom onto the wall bracket.
Step 3
B. Secure your display to the wall by tightening the set screw (120).
Cable Connection
CAUTION: Make sure your cables do not run through a pinch point.
Connect and secure power/audio/video cables, making sure to leave
sufficient slack to allow for movement of the display. Secure cables using
cover plates (100) and four screws (110).
T E N S I O N A D J U S T M E N T S
Lateral Tension
Adjustment Bolts
Spherical Movement
Tension Adjustment Bolt
4