CHIEF PWRSKU, Руководство по установке

Страница: 7 / 12

Installation Instructions PWRSKU
7
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
EQUIPMENT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Overtightening of
mounting hardware can damage the steel studs. DO NOT
overtighten mounting hardware!
Figure 6
Cover Installation
To install channel covers:
1.
Install upper wall channel cover (E) by tipping cover top
down and positioning as shown in figure below.
(See Figure 7)
2. Lower bottom of upper wall channel cover (E) and tap firmly
across bottom of channel to lock in place as shown in figure
below. (See Figure 7)
3. Install R.H. and L.H. end caps (G) by aligning tabs on end
caps with slots in wall channel and sliding tabs into channel
until end cap is flush with wall channel cover cover (E).
4. Repeat steps 4 through 6 above for lower wall channel
cover and end caps.
Steel Stud
Drywall
Anchor Metal Channel
Display Mount
SIDE VIEW
(B) x 8
(C) x 8
12
13
Figure 7
1
3
END VIEW
1
2
1
3
1
2
(G) x 4
(E) x 2