CHIEF OLCM2X1U, Руководство по установке

Страница: 12 / 16

OXCM1U Installation Instructions
12
Level Adjustment
1. Adjust level adjustment screws to change roll position.The
roll may be adjusted 1° in either direction. (See Figure 23)
Figure 23
Latch Lock/Security
IMPORTANT ! : In order to prevent interface latch from
getting loose due to strong winds, the latch MUST be
locked either using a padlock or locking bolt (P), 5/16"
washers (S) and 5/16-18 hex nuts (R). This is NOT
optional!
Using Padlocks (Security)
1. Add padlock (not included) to each interface bracket to lock
latch and to provide security for displays. (See Figure 24)
Figure 24
Using Bolts/Nuts
NOTE:
This will keep latch from opening but does not provide
additional security for the displays.
1. Use 5/16-18 x 2" hex head carriage bolt (P), 5/16-18 hex nut
(R) and two 5/16" washers (S) to lock each interface bracket
latch in place. (See Figure 25)
Figure 25
level adjustment screws
or
Padlock
(Optional)
(wind shield hidden for clarity)
(P)
(R)
(wind shield hidden for clarity)
(S) x 2