CHIEF OLCM2X1U, Руководство по установке

Страница: 10 / 16

OXCM1U Installation Instructions
10
Attaching Interface Brackets to Display
1. Lower the latch mechanism on each interface bracket (L).
(See Figure 17)
Figure 17
2. Align the center of the interface bracket (L) with center of
screen. (See Figure 18)
NOTE:
The diamond-shape hole in the bracket corresponds to
the center of the mount.
Figure 18
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
3. Select correct screws, spacers (if necessary) and universal
washers from the hardware bag (A-G) and attach brackets
(L) to back of screen. (See Figure 18)
Attaching Display to Ceiling Mount
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
OXCM1U mounts does not exceed 250 lbs (113.4 kg).
1. Ensure that the latch mechanisms on interface brackets (L)
are already lowered. (See Figure 17)
2. While supporting both sides of display, lower display onto
ceiling mount, hooking top of interface brackets onto front of
ceiling mount. (See Figure 19)
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The display MUST
be centered on the ceiling mount.
3. Raise the latch mechanism on both interface brackets to
lock bracket in place. (See Figure 19)
Figure 19
(L) x 2
1
Latch
mechanism
Center of
bracket
(E or F) x 4
(A-D) x 4
(L) x 2
3
2
(G) x 4
(if necessary)
2
3
Latch
mechanism
(wind shield hidden for clarity)