CHIEF MSP-WM46UN2X2, Руководство по установке

Страница: 7 / 12

Installation Instructions MSP-WM46UN2X2
7
3. Make sure locking flags on mount are in open position. (See
Figure 7)
Figure 7
IMPORTANT ! : For proper installation, the four displays
MUST be installed in the EXACT ORDER specified in
these instructions and shown in Figure 8.
Figure 8
4. Lift display onto mount by inserting mounting buttons into
teardrop openings on vertical mounting brackets. (See
Figure 9)
Figure 9
5. Move locking flag to closed position by wrapping it around
mounting button. (See Figure 10)
6. Slide flag towards center of the mount to secure flag around
mouting button. (See Figure 10)
7. Tighten screw to push mounting button towards center of
mount and further secure display to mount. (See Figure 10)
Figure 10
NOTE:
Slots on vertical brackets can be used for cable
management by using cable ties (G) to secure cables
to brackets. (See Figure 10)
8. Repeat Steps 4 through 7 for top left display.
flags in open position
3
3
2
1
4
3
4
(display hidden for
7
5
6
slot for cable
management
viewing purposes)