CHIEF MSP-WM46UN2X2, Руководство по установке

Страница: 5 / 12

Installation Instructions MSP-WM46UN2X2
5
ASSEMBLY AND INSTALLATION
Mount Assembly
1. Arrange four vertical brackets (B-D) with two horizontal
brackets (A) making sure the right vertical bracket (C) is on
the far right and the left vertical bracket (D) is on the far left.
(See Figure 1)
2. Use 16 5/16-18" lock nuts (L) to attach vertical brackets to
horizontal brackets. (See Figure 1)
Figure 1
Attach Mount to Wall - Concrete
NOTE:
If attaching to wood studs, proceed to Attach Mount to
Wall - Wood Studs section.
1. Determine mounting location on wall.
2. Determine mounting slots to be used for installation. (See
Note below and Figure 2)
NOTE:
Slots used must be at least 24" apart. Mount must be
centered on a/- 4 1/2". (See Figure 2)
Figure 2
3. Using assembled mount as a template, mark four holes in
selected mounting holes on wall. Use a level to make sure
of an even mount. (See Figure 3)
4. Drill four 3/8" holes in wall 2 1/2" deep at marked locations.
(See Figure 3)
5. Install four concrete anchors (M) into four drilled holes on
wall. (See Figure 3)
6. Install four 3/8 x 2 1/2" hex head lag screws (N) through
holes on mount and into four concrete anchors. (See Figure
3)
Figure 3
(B) x 2
(L) x 16 2
(C)
(D)
(A) x 2
24" min. centered
24" min.(4 1/2" right)
24" min.(4 1/2" left)
(M) x 4
5
6
(N) x 4
3
4
x 4