MSP-WL4
Installation Instructions
6
Assembly And Installation
Connecting K1S Series to Office Furniture
1.
Verify mounting brackets on OFBU bracket on mounting
arm (A) can move freely. (See Figure 1)
Figure 1
2.
Locate desired installation location and slide upper
mounting plate into wall making sure bracket is seated in
channel bottom. (See Figure 2)
3.
Let lower mounting plate rest against wall.
4.
Using 1/2” socket, tighten tension hex head bolt until lower
mounting plate slides into channel in wall and continue
tightening until resistance is felt. (See Figure 2)
Figure 2
5.
Tighten two upper and lower button head cap screws to
secure OFBU bracket to wall. (See Figure 3)
Figure 3
IMPORTANT ! :
If the display being installed has a recessed
mounting surface, the display must be assembled to the mount
prior to mount installation. See
Display Installation
in this
document before proceeding.
x4
(OFBU bracket)
1
(A)
(OFBU)
2
3
4
(OFBU)
4
(arm not shown
for clarity)
x4
(OFBU)
5
5
(arm not shown
for clarity)