background image

CSPHK

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

DEFINITIONS

MOUNTING SYSTEM:

A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component
is attached.

ACCESSORY:

AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may
have a component attached or setting on it.

COMPONENT:

A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

 IMPORTANT SAFETY INSTRUCTIONS

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.

WARNING:

Failure to provide adequate structural strength

for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to this accessory does not exceed
20 lbs (9.07 kg).

WARNING:

Use this accessory only for its intended use as

described in these instructions. Do not use attachments not
recommended by the manufacturer.

WARNING:

Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and
repair.

WARNING:

Do not use this accessory outdoors.

WARNING:

RISK OF INJURY TO PERSONS! Do not use

this accessory to support video equipment such as
televisions or computer monitors.

--SAVE THESE INSTRUCTIONS-

TOOLS/PARTS REQUIRED FOR INSTALLATION

3/32" (2.38mm)

#2

5/32" (security)

(included)

A (1)

5/32"

(security)

B (2)

[Desk bracket]

C (2)

#10-24 x 3/4"

D (4)

#10 x 3/4"

E (4)

#10-24 x 1/2"

F (2)

Quick release pin

Содержание CSPHK

Страница 1: ... N I N S T R U C T I O N S CSP Hinged Bracket Kit Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description CSPHK ...

Страница 2: ...r destruction of equipment if you do not follow the corresponding instructions IMPORTANT SAFETY INSTRUCTIONS WARNING Failure to read thoroughly understand and follow all instructions can result in serious personal injury damage to equipment or voiding of factory warranty It is the installer s responsibility to make sure all accessories are properly assembled and installed using the instructions pr...

Страница 3: ... mount plate to desk Figure 2 4 Loosely install two 10 24 x 3 4 Phillips pan machine screws C into bottom holes on CSPH desk plate Two 10 24 x 1 2 button head security screws E may be used in place of two Phillips screws C if greater security is desired See Figure 3 Figure 3 5 Slide CSPH desk plate onto back desk bracket B until two screws C or E sit in slots of bracket B See Figure 4 Figure 4 6 U...

Страница 4: ...918 Europe A Franklinstraat 14 6003 DK Weert Netherlands P 31 0 495 580 852 F 31 0 495 580 845 Asia Pacific A Office No 918 on 9 F Shatin Galleria 18 24 Shan Mei Street Fotan Shatin Hong Kong P 852 2145 4099 F 852 2145 4477 Chief a products division of Milestone AV Technologies 8800 002984 Rev00 2017 Milestone AV Technologies www milestone com 07 17 ...

Отзывы: