Installation Instructions
Cinema Projector Mount
7
Projector Mount Installation to Ceiling Pipe
WARNING:
IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST
be capable of supporting five times the
combined weight of all equipment being mounted.
1.
Align projector mount (A) with end of ceiling pipe
(B).
2.
Thread projector mount (A) up onto pipe by turning
counter-clockwise until hand tight.
Rough Alignment of Projector Mount
1.
Turn projector mount (A) clockwise or counter-
clockwise until front of mount is facing target.
IMPORTANT ! :
When projector mount is
properly positioned, the set screw access hole
should be pointing directly at target.
(see bottom detail in figure at left)
2.
Secure projector mount (A) to pipe by turning set
screw until tight.
CAUTION:
DO NOT OVERTIGHTEN!
Overtightening of setscrew can damage threads on
pipe.
3.
Turn security screw using a Phillips screwdriver
until set screw cannot be seen through access hole
in projector mount.
1
1
2
(A)
2
1
3
1
(A)
