Chicco Seat2Fit i-Size, Инструкция по эксплуатации

Страница: 23 / 156

23 22
To remove the fabric cover follow the instruc-
tions below:
Headrest:
Remove the headrest (Fig. 33), then free the
flap located on the lower part of the headrest
(Fig. 34)
Seat:
Release the buttons on the central flap first
(Fig. 35), then release the buttons located near
the reclining lever (Fig. 36), finally pull the fab-
ric off of the body (Fig. 37). Remove the shoul-
der straps, freeing them from the metal hook
(Fig. 38) and from the crotch strap.
To fit the fabric cover back on the car seat,
repeat the steps illustrated above in reverse
order.
HOW TO CLEAN THE PLASTIC OR METAL
PARTS
Clean the plastic and coated metal parts with
a damp cloth only. Never use abrasive deter-
gents or solvents. The moving parts of the
child car seat must not be lubricated.
CHECKING THE CONDITION OF THE COM-
PONENTS
It is recommended to regularly check the condi-
tion of the following components to make sure
they are not damaged or worn:
Lining: check that the padding does not come
out from the seams. Check the condition of
the seams: they must always be intact and
undamaged.
harness straps: check that the fabric lining is
not frayed or the harness strap worn out in
areas around the adjuster on the crotch strap,
shoulders and harness adjustment plate.
plastic parts: check that the plastic parts are
not worn out, damaged or faded.
WARNING!
If the child car seat is damaged,
deformed or excessively worn, it must be re-
placed as its original safety features may have
been compromised.
STORING THE PRODUCT
When it is not fitted in the car, it is advisable
to store the child car seat in a dry place, away
from sources of heat and to protect it from
dust, humidity and direct sunlight.
DISPOSING OF THE PRODUCT
When the child car seat no longer complies
with the original safety standards, stop using
it and dispose of it at an appropriate collection
point. Always dispose of the child car seat fol-
lowing the guidance and regulations set out in
the country of use.
WARRANTY
The product is guaranteed against any con-
formity defect in normal conditions of use as
described in the instructions. The warranty
shall not therefore apply in the case of dam-
age caused by improper use, wear or acciden-
tal events. For the duration of the warranty on
conformity defects please refer to the specific
provisions of applicable national laws in the
country of pur chase, where appropriate.