14
15
LATCH REMOVAL & STORAGE
SHOULDER BELT LOCKOFF
Removing LATCH:
1
Pull LATCH Connectors out of
storage pockets while lifting up on
LATCH Release Lever.
Storing LATCH:
2
Insert LATCH Connectors into
storage pockets.
3
Pull LATCH Pull Strap to
secure LATCH Connectors.
4
Roll LATCH Pull Strap and
store in Pull Strap Storage Pocket.
Do not put the shoulder belt in
the locked mode before installing
and using the Shoulder Belt
Lockoff.
1
With vehicle belt tight,
position the shoulder belt under
the Shoulder Belt Lockoff that is
on the opposite side of the buckle.
Do not pull belt to tighten when
belt is in the Shoulder Belt Lockoff.
Applying too much pressure to the
Lockoff can damage it.
2
Firmly slide shoulder belt into
the lockoff.
(Optional: Once the base is installed
tightly, the shoulder belt can be put in
the locked mode. See vehicle owner’s
manual or label on seat belt for more
information.)
This Child Restraint can be safely installed using vehicle
belts or LATCH. LATCH is a Child Restraint attachment
system that is standard in most vehicles manufactured
after September 1, 2002. Refer to your vehicle owner’s
manual for details regarding LATCH use in your vehicle.
When not using LATCH, the LATCH Connectors and Pull Strap
MUST be stored properly to allow Carrier to attach securely to
Base.
2
3
4
1
2
The Shoulder Belt Lockoff is used when installing the Base using
your vehicle belts. It locks the vehicle shoulder belt in place,
ensuring a stable, secure Base installation.
Refer to “Installation Using
Vehicle Belt” on page 32 for
detailed installation instructions.
1
