SKU 99630
For technical questions, please call 1-800-444-3353.
Page 8
OpERaTIng InsTRuCTIOns
COnTInuED
You can lift loads up to 110 Lbs. using
8.
the single cable. See Figure 2 below.
You can lift loads up to 220 Lbs. us-
9.
ing the double cable configuration.
Connect the Lift Hook to the Hoist
body (6) then connect the load to the
Pully Lift Hook as shown in Figure 3
below.
Make sure the cable is wound prop-
10.
erly on the Spool (13).
Leave at least three turns of the cable
11.
around the Spool (13) to keep the
cable from detaching from the Spool
(13). See Figure 4 below.
WaRnIng!
If you are unable to lift
the load do not continue to operate the
power switch. This can damage the mo-
tor.
maInTEnanCE anD
sERVICIng
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician. Disconnect
the power cord before
performing any maintenance.
Lubricate the cable occasionally with
1.
light oil. Check that it is in good con-
dition.
Check to be sure the hoist is properly
2.
attached to its mounting pole. Make
sure the bolts are tight.
3.
WaRnIng!
Periodically check the
condition of the electrical cords, plugs
and controls. If the supply cord of this
Electric Hoist is damaged, it must be
replaced only by a qualified service
technician.
maximum
Capacity
110 lbs.
FIguRE 2
maximum
Capacity
220 lbs.
FIguRE 3
FIguRE 4
Double Cable lifting
single Cable lifting
lift Hook
pully lift
Hook
lift Hook
load
load
