SKU 99630
For technical questions, please call 1-800-444-3353.
Page 6
spECIFICaTIOns
Electrical Requirements 120 V~ / 60 Hz / 1.9 A
Cable Construction
6x7 ISW, .102” Dia.
Single Cable Capacity
110 lb.
Double Cable Capacity
220 lb.
Maximum Lift
26-1/4 Feet
Lifting Speed Single
Cable
26 Feet Per Minute
Lifting Speed Double
Cable
13 Feet Per Minute
unpaCKIng
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
InsTRuCTIOns FOR
puTTIng InTO usE
Read the EnTIRE ImpORTanT
saFETY InFORmaTIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO pREVEnT
sERIOus InjuRY
FROm aCCIDEnTal
OpERaTIOn:
Turn the power switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Tool set up
TO pREVEnT
sERIOus InjuRY
FROm aCCIDEnTal
OpERaTIOn:
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
Work piece and Work area set up
Designate a work area that is clean
1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Route the power cord along a safe
2.
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage.
The power cord must reach the work
area with enough extra length to al-
low free movement while working.
There must not be hazardous ob-
3.
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
To prevent accidents, turn off the tool
4.
and disconnect its power supply after
use. Clean, then store the tool in-
doors out of children’s reach.
