10
3.2 Connecting the Shifter
Align the
Shifter Mounting Bracket
with the mounting holes on the
Seat
Cabinet
so the wood piece is facing
up, as shown here. Secure the bracket
in place using the four screws and
washers in the bag marked
Shifter Mounting Hardware
.
To connect the
Shifter
to the
Shifter Mounting Bracket
, you must
first loosen the mounting clamps on the
Shifter
. Turn the knobs on
both sides of the
Shifter
counterclockwise to lower the mounting
clamps, and twist the bottom center clamping screw
so that the
Shifter
can mount to the bracket as
shown. Once in position, tighten the two knobs
and screw again to hold the
Shifter
in place.
Pull the
Shifter
cable through the hole in the
cabinet just below the shifter. Reach in through
the rectangular hole in the
Foot Box
and pull the cable
through. Find the bag
labeled
Shifter Mounting
Hardware
. From under
the
Shifter
, use the
two screws to secure
the
Shifter
to the
Shifter Mounting
Bracket
.
Run
Shifter
cable through
this hole and pull into the
Foot Box
with the others.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
