background image

Page 6

SKU 98113

For technical questions, please call 1-800-444-3353.

double Insulated Tools: Tools 

with Two prong AC plugs

Outlets for 2-prong AC plug

1.  AC/DC Adapters marked “Double 

Insulated” do not require grounding.  

They have a special double insulation 

system which satisfies OSHA require

-

ments and complies with the applica-

ble standards of Underwriters Labo-

ratories, Inc., the Canadian Standard 

Association, and the National Electri-

cal Code. 

Double insulated AC/DC Adapters 

2. 

may be used in either of the 120 volt 

outlets shown in the preceding illus-

tration. 

SYMBOLOGY

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V~

Volts Alternating Current

A

Amperes

n0 xxxx/min.

No Load Revolutions per Minute 

(RPM)

SpECIFICATIOnS

Electrical 

Requirements

Input: 120 VAC~ / 60 Hz / or 12 VDC

Output: 12 VDC @ 400mA

120 VAC, AC/DC Adapter: 2 Prong, 

Grounded

VDC Cigarette Lighter Adapter, Grounded

Battery Type: 7.2V, 900Ah, Ni-MH

                      Rechargeable

                      (Not Replaceable)

Initial Battery Charge Time: 10 Hours

Subsequent Charge Times: 6 Hours

Approximate Run Time: Up to 4 Hours

Cigarette Lighter Fuse Type: F3AL250V

Power Switch: Single Pole, Single Throw   

Battery 

Indicator 

Lights

Battery needs Charging:

Right Side LED Illuminates RED

Battery Charging:

Left Side LED Illuminates RED

Battery Charged:

Left Side LED Illuminates Green

Bulb Type

& Quantity

Light Emitting Diode (LED) / 60 Pieces

Light Output

(LUX)

1080 LUX @ 12 Inches

          

unpACKInG

When unpacking, check to make sure 

that the item is intact and undamaged.  If 

any parts are missing or broken, please 

call Harbor Freight Tools at the number 

shown on the cover of this manual as soon 

as possible.

OpERATInG InSTRuCTIOnS

Read the EnTIRE IMpORTAnT 

SAFETY InFORMATIOn section 

at the beginning of this manual 

including all text under 

subheadings therein before set 

up or use of this product.

Содержание 98113












Отзывы: