Page 4
SKU 97594
For technical questions, please call 1-800-444-3353.
proved for the specific hazards in the
work area.
power tool use and care
4.
Do not force the power tool. use
a.
the correct power tool for your ap-
plication.
The correct power tool will
do the job better and safer at the rate
for which it was designed.
Do not use the power tool if the
b.
switch does not turn it on and off.
Any power tool that cannot be con
-
trolled with the switch is dangerous
and must be repaired.
Disconnect the plug from the
c.
power source and/or the battery
pack from the power tool before
making any adjustments, chang-
ing accessories, or storing power
tools.
Such preventive safety mea
-
sures reduce the risk of starting the
power tool accidentally.
store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. if dam-
aged, have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
Keep cutting tools sharp and
f.
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
use the power tool, accessories
g.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations differ
-
ent from those intended could result
in a hazardous situation.
service
6.
Have your power tool serviced by
a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Drill and impact Drill
safety warnings
wear ear protectors with impact
1.
drills.
Exposure to noise can cause
hearing loss.
use auxiliary handles supplied
2.
with the tool. Loss of control can
cause personal injury.
Hold power tools by insulated grip-
3.
ping surfaces when performing an
operation where the cutting tool
may contact hidden wiring or its
own cord.
Contact with a ″live″ wire
will make exposed metal parts of the
tool ″live″ and shock the operator.
Maintain labels and nameplates on
4.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare
5.
to begin work before turning on the
tool.
Do not lay the tool down until it has
6.
come to a complete stop. Moving
